Qmi.MessageWdsCreateProfileInput

Fields

None

Methods

class

new ()

get_apn_disabled_flag ()

get_apn_name ()

get_apn_type_mask ()

get_authentication ()

get_gprs_minimum_qos ()

get_gprs_requested_qos ()

get_imcn_flag ()

get_ipv4_address_preference ()

get_ipv6_address_preference ()

get_ipv6_primary_dns_address_preference ()

get_ipv6_secondary_dns_address_preference ()

get_lte_qos_parameters ()

get_password ()

get_pcscf_address_using_dhcp ()

get_pcscf_address_using_pco ()

get_pdp_context_number ()

get_pdp_context_primary_id ()

get_pdp_context_secondary_flag ()

get_pdp_data_compression_type ()

get_pdp_header_compression_type ()

get_pdp_type ()

get_primary_ipv4_dns_address ()

get_profile_name ()

get_profile_type ()

get_roaming_disallowed_flag ()

get_secondary_ipv4_dns_address ()

get_umts_minimum_qos ()

get_umts_minimum_qos_with_signaling_indication_flag ()

get_umts_requested_qos ()

get_umts_requested_qos_with_signaling_indication_flag ()

get_username ()

ref ()

set_apn_disabled_flag (value_apn_disabled_flag)

set_apn_name (value_apn_name)

set_apn_type_mask (value_apn_type_mask)

set_authentication (value_authentication)

set_gprs_minimum_qos (value_gprs_minimum_qos_precedence_class, value_gprs_minimum_qos_delay_class, value_gprs_minimum_qos_reliability_class, value_gprs_minimum_qos_peak_throughput_class, value_gprs_minimum_qos_mean_throughput_class)

set_gprs_requested_qos (value_gprs_requested_qos_precedence_class, value_gprs_requested_qos_delay_class, value_gprs_requested_qos_reliability_class, value_gprs_requested_qos_peak_throughput_class, value_gprs_requested_qos_mean_throughput_class)

set_imcn_flag (value_imcn_flag)

set_ipv4_address_preference (value_ipv4_address_preference)

set_ipv6_address_preference (value_ipv6_address_preference_address)

set_ipv6_primary_dns_address_preference (value_ipv6_primary_dns_address_preference)

set_ipv6_secondary_dns_address_preference (value_ipv6_secondary_dns_address_preference)

set_lte_qos_parameters (value_lte_qos_parameters_qos_class_identifier, value_lte_qos_parameters_guaranteed_downlink_bitrate, value_lte_qos_parameters_max_downlink_bitrate, value_lte_qos_parameters_guaranteed_uplink_bitrate, value_lte_qos_parameters_max_uplink_bitrate)

set_password (value_password)

set_pcscf_address_using_dhcp (value_pcscf_address_using_dhcp)

set_pcscf_address_using_pco (value_pcscf_address_using_pco)

set_pdp_context_number (value_pdp_context_number)

set_pdp_context_primary_id (value_pdp_context_primary_id)

set_pdp_context_secondary_flag (value_pdp_context_secondary_flag)

set_pdp_data_compression_type (value_pdp_data_compression_type)

set_pdp_header_compression_type (value_pdp_header_compression_type)

set_pdp_type (value_pdp_type)

set_primary_ipv4_dns_address (value_primary_ipv4_dns_address)

set_profile_name (value_profile_name)

set_profile_type (value_profile_type)

set_roaming_disallowed_flag (value_roaming_disallowed_flag)

set_secondary_ipv4_dns_address (value_secondary_ipv4_dns_address)

set_umts_minimum_qos (value_umts_minimum_qos_traffic_class, value_umts_minimum_qos_max_uplink_bitrate, value_umts_minimum_qos_max_downlink_bitrate, value_umts_minimum_qos_guaranteed_uplink_bitrate, value_umts_minimum_qos_guaranteed_downlink_bitrate, value_umts_minimum_qos_qos_delivery_order, value_umts_minimum_qos_maximum_sdu_size, value_umts_minimum_qos_sdu_error_ratio, value_umts_minimum_qos_residual_bit_error_ratio, value_umts_minimum_qos_delivery_erroneous_sdu, value_umts_minimum_qos_transfer_delay, value_umts_minimum_qos_traffic_handling_priority)

set_umts_minimum_qos_with_signaling_indication_flag (value_umts_minimum_qos_with_signaling_indication_flag_traffic_class, value_umts_minimum_qos_with_signaling_indication_flag_max_uplink_bitrate, value_umts_minimum_qos_with_signaling_indication_flag_max_downlink_bitrate, value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate, value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate, value_umts_minimum_qos_with_signaling_indication_flag_qos_delivery_order, value_umts_minimum_qos_with_signaling_indication_flag_maximum_sdu_size, value_umts_minimum_qos_with_signaling_indication_flag_sdu_error_ratio, value_umts_minimum_qos_with_signaling_indication_flag_residual_bit_error_ratio, value_umts_minimum_qos_with_signaling_indication_flag_delivery_erroneous_sdu, value_umts_minimum_qos_with_signaling_indication_flag_transfer_delay, value_umts_minimum_qos_with_signaling_indication_flag_traffic_handling_priority, value_umts_minimum_qos_with_signaling_indication_flag_signaling_indication)

set_umts_requested_qos (value_umts_requested_qos_traffic_class, value_umts_requested_qos_max_uplink_bitrate, value_umts_requested_qos_max_downlink_bitrate, value_umts_requested_qos_guaranteed_uplink_bitrate, value_umts_requested_qos_guaranteed_downlink_bitrate, value_umts_requested_qos_qos_delivery_order, value_umts_requested_qos_maximum_sdu_size, value_umts_requested_qos_sdu_error_ratio, value_umts_requested_qos_residual_bit_error_ratio, value_umts_requested_qos_delivery_erroneous_sdu, value_umts_requested_qos_transfer_delay, value_umts_requested_qos_traffic_handling_priority)

set_umts_requested_qos_with_signaling_indication_flag (value_umts_requested_qos_with_signaling_indication_flag_traffic_class, value_umts_requested_qos_with_signaling_indication_flag_max_uplink_bitrate, value_umts_requested_qos_with_signaling_indication_flag_max_downlink_bitrate, value_umts_requested_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate, value_umts_requested_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate, value_umts_requested_qos_with_signaling_indication_flag_qos_delivery_order, value_umts_requested_qos_with_signaling_indication_flag_maximum_sdu_size, value_umts_requested_qos_with_signaling_indication_flag_sdu_error_ratio, value_umts_requested_qos_with_signaling_indication_flag_residual_bit_error_ratio, value_umts_requested_qos_with_signaling_indication_flag_delivery_erroneous_sdu, value_umts_requested_qos_with_signaling_indication_flag_transfer_delay, value_umts_requested_qos_with_signaling_indication_flag_traffic_handling_priority, value_umts_requested_qos_with_signaling_indication_flag_signaling_indication)

set_username (value_username)

unref ()

Details

class Qmi.MessageWdsCreateProfileInput

The Qmi.MessageWdsCreateProfileInput structure contains private data and should only be accessed using the provided API.

New in version 1.18.

classmethod new()
Returns:

the newly created Qmi.MessageWdsCreateProfileInput. The returned value should be freed with Qmi.MessageWdsCreateProfileInput.unref().

Return type:

Qmi.MessageWdsCreateProfileInput

Allocates a new Qmi.MessageWdsCreateProfileInput.

New in version 1.18.

get_apn_disabled_flag()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_apn_disabled_flag:

a placeholder for the output bool, or None if not required.

Return type:

(bool, value_apn_disabled_flag: bool)

Get the ‘APN Disabled Flag’ field from self.

New in version 1.22.

get_apn_name()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_apn_name:

a placeholder for the output constant string, or None if not required.

Return type:

(bool, value_apn_name: str)

Get the ‘APN Name’ field from self.

New in version 1.18.

get_apn_type_mask()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_apn_type_mask:

a placeholder for the output Qmi.WdsApnTypeMask, or None if not required.

Return type:

(bool, value_apn_type_mask: Qmi.WdsApnTypeMask)

Get the ‘APN Type Mask’ field from self.

New in version 1.30.

get_authentication()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_authentication:

a placeholder for the output Qmi.WdsAuthentication, or None if not required.

Return type:

(bool, value_authentication: Qmi.WdsAuthentication)

Get the ‘Authentication’ field from self.

New in version 1.18.

get_gprs_minimum_qos()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_gprs_minimum_qos_precedence_class:

a placeholder for the output #guint32, or None if not required.

value_gprs_minimum_qos_delay_class:

a placeholder for the output #guint32, or None if not required.

value_gprs_minimum_qos_reliability_class:

a placeholder for the output #guint32, or None if not required.

value_gprs_minimum_qos_peak_throughput_class:

a placeholder for the output #guint32, or None if not required.

value_gprs_minimum_qos_mean_throughput_class:

a placeholder for the output #guint32, or None if not required.

Return type:

(bool, value_gprs_minimum_qos_precedence_class: int, value_gprs_minimum_qos_delay_class: int, value_gprs_minimum_qos_reliability_class: int, value_gprs_minimum_qos_peak_throughput_class: int, value_gprs_minimum_qos_mean_throughput_class: int)

Get the ‘GPRS Minimum QoS’ field from self.

New in version 1.18.

get_gprs_requested_qos()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_gprs_requested_qos_precedence_class:

a placeholder for the output #guint32, or None if not required.

value_gprs_requested_qos_delay_class:

a placeholder for the output #guint32, or None if not required.

value_gprs_requested_qos_reliability_class:

a placeholder for the output #guint32, or None if not required.

value_gprs_requested_qos_peak_throughput_class:

a placeholder for the output #guint32, or None if not required.

value_gprs_requested_qos_mean_throughput_class:

a placeholder for the output #guint32, or None if not required.

Return type:

(bool, value_gprs_requested_qos_precedence_class: int, value_gprs_requested_qos_delay_class: int, value_gprs_requested_qos_reliability_class: int, value_gprs_requested_qos_peak_throughput_class: int, value_gprs_requested_qos_mean_throughput_class: int)

Get the ‘GPRS Requested QoS’ field from self.

New in version 1.18.

get_imcn_flag()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_imcn_flag:

a placeholder for the output bool, or None if not required.

Return type:

(bool, value_imcn_flag: bool)

Get the ‘IMCN Flag’ field from self.

New in version 1.18.

get_ipv4_address_preference()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_ipv4_address_preference:

a placeholder for the output #guint32, or None if not required.

Return type:

(bool, value_ipv4_address_preference: int)

Get the ‘IPv4 Address Preference’ field from self.

New in version 1.18.

get_ipv6_address_preference()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_ipv6_address_preference_address:

a placeholder for the output GLib.Array of #guint16 elements, or None if not required. Do not free it, it is owned by self.

Return type:

(bool, value_ipv6_address_preference_address: [int])

Get the ‘IPv6 Address Preference’ field from self.

New in version 1.18.

get_ipv6_primary_dns_address_preference()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_ipv6_primary_dns_address_preference:

a placeholder for the output GLib.Array of #guint16 elements, or None if not required. Do not free it, it is owned by self.

Return type:

(bool, value_ipv6_primary_dns_address_preference: [int])

Get the ‘IPv6 Primary DNS Address Preference’ field from self.

New in version 1.18.

get_ipv6_secondary_dns_address_preference()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_ipv6_secondary_dns_address_preference:

a placeholder for the output GLib.Array of #guint16 elements, or None if not required. Do not free it, it is owned by self.

Return type:

(bool, value_ipv6_secondary_dns_address_preference: [int])

Get the ‘IPv6 Secondary DNS Address Preference’ field from self.

New in version 1.18.

get_lte_qos_parameters()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_lte_qos_parameters_qos_class_identifier:

a placeholder for the output Qmi.WdsQosClassIdentifier, or None if not required.

value_lte_qos_parameters_guaranteed_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_lte_qos_parameters_max_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_lte_qos_parameters_guaranteed_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_lte_qos_parameters_max_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

Return type:

(bool, value_lte_qos_parameters_qos_class_identifier: Qmi.WdsQosClassIdentifier, value_lte_qos_parameters_guaranteed_downlink_bitrate: int, value_lte_qos_parameters_max_downlink_bitrate: int, value_lte_qos_parameters_guaranteed_uplink_bitrate: int, value_lte_qos_parameters_max_uplink_bitrate: int)

Get the ‘LTE QoS Parameters’ field from self.

New in version 1.18.

get_password()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_password:

a placeholder for the output constant string, or None if not required.

Return type:

(bool, value_password: str)

Get the ‘Password’ field from self.

New in version 1.18.

get_pcscf_address_using_dhcp()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_pcscf_address_using_dhcp:

a placeholder for the output bool, or None if not required.

Return type:

(bool, value_pcscf_address_using_dhcp: bool)

Get the ‘PCSCF Address Using DHCP’ field from self.

New in version 1.18.

get_pcscf_address_using_pco()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_pcscf_address_using_pco:

a placeholder for the output bool, or None if not required.

Return type:

(bool, value_pcscf_address_using_pco: bool)

Get the ‘PCSCF Address Using PCO’ field from self.

New in version 1.18.

get_pdp_context_number()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_pdp_context_number:

a placeholder for the output #guint8, or None if not required.

Return type:

(bool, value_pdp_context_number: int)

Get the ‘PDP Context Number’ field from self.

New in version 1.18.

get_pdp_context_primary_id()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_pdp_context_primary_id:

a placeholder for the output #guint8, or None if not required.

Return type:

(bool, value_pdp_context_primary_id: int)

Get the ‘PDP Context Primary ID’ field from self.

New in version 1.18.

get_pdp_context_secondary_flag()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_pdp_context_secondary_flag:

a placeholder for the output bool, or None if not required.

Return type:

(bool, value_pdp_context_secondary_flag: bool)

Get the ‘PDP Context Secondary Flag’ field from self.

New in version 1.18.

get_pdp_data_compression_type()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_pdp_data_compression_type:

a placeholder for the output Qmi.WdsPdpDataCompressionType, or None if not required.

Return type:

(bool, value_pdp_data_compression_type: Qmi.WdsPdpDataCompressionType)

Get the ‘PDP Data Compression Type’ field from self.

New in version 1.18.

get_pdp_header_compression_type()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_pdp_header_compression_type:

a placeholder for the output Qmi.WdsPdpHeaderCompressionType, or None if not required.

Return type:

(bool, value_pdp_header_compression_type: Qmi.WdsPdpHeaderCompressionType)

Get the ‘PDP Header Compression Type’ field from self.

New in version 1.18.

get_pdp_type()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_pdp_type:

a placeholder for the output Qmi.WdsPdpType, or None if not required.

Return type:

(bool, value_pdp_type: Qmi.WdsPdpType)

Get the ‘PDP Type’ field from self.

New in version 1.18.

get_primary_ipv4_dns_address()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_primary_ipv4_dns_address:

a placeholder for the output #guint32, or None if not required.

Return type:

(bool, value_primary_ipv4_dns_address: int)

Get the ‘Primary IPv4 DNS Address’ field from self.

New in version 1.18.

get_profile_name()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_profile_name:

a placeholder for the output constant string, or None if not required.

Return type:

(bool, value_profile_name: str)

Get the ‘Profile Name’ field from self.

New in version 1.18.

get_profile_type()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_profile_type:

a placeholder for the output Qmi.WdsProfileType, or None if not required.

Return type:

(bool, value_profile_type: Qmi.WdsProfileType)

Get the ‘Profile Type’ field from self.

New in version 1.18.

get_roaming_disallowed_flag()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_roaming_disallowed_flag:

a placeholder for the output bool, or None if not required.

Return type:

(bool, value_roaming_disallowed_flag: bool)

Get the ‘Roaming Disallowed Flag’ field from self.

New in version 1.22.

get_secondary_ipv4_dns_address()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_secondary_ipv4_dns_address:

a placeholder for the output #guint32, or None if not required.

Return type:

(bool, value_secondary_ipv4_dns_address: int)

Get the ‘Secondary IPv4 DNS Address’ field from self.

New in version 1.18.

get_umts_minimum_qos()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_umts_minimum_qos_traffic_class:

a placeholder for the output Qmi.WdsTrafficClass, or None if not required.

value_umts_minimum_qos_max_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_max_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_guaranteed_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_guaranteed_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_qos_delivery_order:

a placeholder for the output Qmi.WdsDeliveryOrder, or None if not required.

value_umts_minimum_qos_maximum_sdu_size:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_sdu_error_ratio:

a placeholder for the output Qmi.WdsSduErrorRatio, or None if not required.

value_umts_minimum_qos_residual_bit_error_ratio:

a placeholder for the output Qmi.WdsSduResidualBitErrorRatio, or None if not required.

value_umts_minimum_qos_delivery_erroneous_sdu:

a placeholder for the output Qmi.WdsSduErroneousDelivery, or None if not required.

value_umts_minimum_qos_transfer_delay:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_traffic_handling_priority:

a placeholder for the output #guint32, or None if not required.

Return type:

(bool, value_umts_minimum_qos_traffic_class: Qmi.WdsTrafficClass, value_umts_minimum_qos_max_uplink_bitrate: int, value_umts_minimum_qos_max_downlink_bitrate: int, value_umts_minimum_qos_guaranteed_uplink_bitrate: int, value_umts_minimum_qos_guaranteed_downlink_bitrate: int, value_umts_minimum_qos_qos_delivery_order: Qmi.WdsDeliveryOrder, value_umts_minimum_qos_maximum_sdu_size: int, value_umts_minimum_qos_sdu_error_ratio: Qmi.WdsSduErrorRatio, value_umts_minimum_qos_residual_bit_error_ratio: Qmi.WdsSduResidualBitErrorRatio, value_umts_minimum_qos_delivery_erroneous_sdu: Qmi.WdsSduErroneousDelivery, value_umts_minimum_qos_transfer_delay: int, value_umts_minimum_qos_traffic_handling_priority: int)

Get the ‘UMTS Minimum QoS’ field from self.

New in version 1.18.

get_umts_minimum_qos_with_signaling_indication_flag()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_umts_minimum_qos_with_signaling_indication_flag_traffic_class:

a placeholder for the output Qmi.WdsTrafficClass, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_max_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_max_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_qos_delivery_order:

a placeholder for the output Qmi.WdsDeliveryOrder, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_maximum_sdu_size:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_sdu_error_ratio:

a placeholder for the output Qmi.WdsSduErrorRatio, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_residual_bit_error_ratio:

a placeholder for the output Qmi.WdsSduResidualBitErrorRatio, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_delivery_erroneous_sdu:

a placeholder for the output Qmi.WdsSduErroneousDelivery, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_transfer_delay:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_traffic_handling_priority:

a placeholder for the output #guint32, or None if not required.

value_umts_minimum_qos_with_signaling_indication_flag_signaling_indication:

a placeholder for the output #gint8, or None if not required.

Return type:

(bool, value_umts_minimum_qos_with_signaling_indication_flag_traffic_class: Qmi.WdsTrafficClass, value_umts_minimum_qos_with_signaling_indication_flag_max_uplink_bitrate: int, value_umts_minimum_qos_with_signaling_indication_flag_max_downlink_bitrate: int, value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate: int, value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate: int, value_umts_minimum_qos_with_signaling_indication_flag_qos_delivery_order: Qmi.WdsDeliveryOrder, value_umts_minimum_qos_with_signaling_indication_flag_maximum_sdu_size: int, value_umts_minimum_qos_with_signaling_indication_flag_sdu_error_ratio: Qmi.WdsSduErrorRatio, value_umts_minimum_qos_with_signaling_indication_flag_residual_bit_error_ratio: Qmi.WdsSduResidualBitErrorRatio, value_umts_minimum_qos_with_signaling_indication_flag_delivery_erroneous_sdu: Qmi.WdsSduErroneousDelivery, value_umts_minimum_qos_with_signaling_indication_flag_transfer_delay: int, value_umts_minimum_qos_with_signaling_indication_flag_traffic_handling_priority: int, value_umts_minimum_qos_with_signaling_indication_flag_signaling_indication: int)

Get the ‘UMTS Minimum QoS With Signaling Indication Flag’ field from self.

New in version 1.18.

get_umts_requested_qos()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_umts_requested_qos_traffic_class:

a placeholder for the output Qmi.WdsTrafficClass, or None if not required.

value_umts_requested_qos_max_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_max_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_guaranteed_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_guaranteed_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_qos_delivery_order:

a placeholder for the output Qmi.WdsDeliveryOrder, or None if not required.

value_umts_requested_qos_maximum_sdu_size:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_sdu_error_ratio:

a placeholder for the output Qmi.WdsSduErrorRatio, or None if not required.

value_umts_requested_qos_residual_bit_error_ratio:

a placeholder for the output Qmi.WdsSduResidualBitErrorRatio, or None if not required.

value_umts_requested_qos_delivery_erroneous_sdu:

a placeholder for the output Qmi.WdsSduErroneousDelivery, or None if not required.

value_umts_requested_qos_transfer_delay:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_traffic_handling_priority:

a placeholder for the output #guint32, or None if not required.

Return type:

(bool, value_umts_requested_qos_traffic_class: Qmi.WdsTrafficClass, value_umts_requested_qos_max_uplink_bitrate: int, value_umts_requested_qos_max_downlink_bitrate: int, value_umts_requested_qos_guaranteed_uplink_bitrate: int, value_umts_requested_qos_guaranteed_downlink_bitrate: int, value_umts_requested_qos_qos_delivery_order: Qmi.WdsDeliveryOrder, value_umts_requested_qos_maximum_sdu_size: int, value_umts_requested_qos_sdu_error_ratio: Qmi.WdsSduErrorRatio, value_umts_requested_qos_residual_bit_error_ratio: Qmi.WdsSduResidualBitErrorRatio, value_umts_requested_qos_delivery_erroneous_sdu: Qmi.WdsSduErroneousDelivery, value_umts_requested_qos_transfer_delay: int, value_umts_requested_qos_traffic_handling_priority: int)

Get the ‘UMTS Requested QoS’ field from self.

New in version 1.18.

get_umts_requested_qos_with_signaling_indication_flag()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_umts_requested_qos_with_signaling_indication_flag_traffic_class:

a placeholder for the output Qmi.WdsTrafficClass, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_max_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_max_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_qos_delivery_order:

a placeholder for the output Qmi.WdsDeliveryOrder, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_maximum_sdu_size:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_sdu_error_ratio:

a placeholder for the output Qmi.WdsSduErrorRatio, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_residual_bit_error_ratio:

a placeholder for the output Qmi.WdsSduResidualBitErrorRatio, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_delivery_erroneous_sdu:

a placeholder for the output Qmi.WdsSduErroneousDelivery, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_transfer_delay:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_traffic_handling_priority:

a placeholder for the output #guint32, or None if not required.

value_umts_requested_qos_with_signaling_indication_flag_signaling_indication:

a placeholder for the output #gint8, or None if not required.

Return type:

(bool, value_umts_requested_qos_with_signaling_indication_flag_traffic_class: Qmi.WdsTrafficClass, value_umts_requested_qos_with_signaling_indication_flag_max_uplink_bitrate: int, value_umts_requested_qos_with_signaling_indication_flag_max_downlink_bitrate: int, value_umts_requested_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate: int, value_umts_requested_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate: int, value_umts_requested_qos_with_signaling_indication_flag_qos_delivery_order: Qmi.WdsDeliveryOrder, value_umts_requested_qos_with_signaling_indication_flag_maximum_sdu_size: int, value_umts_requested_qos_with_signaling_indication_flag_sdu_error_ratio: Qmi.WdsSduErrorRatio, value_umts_requested_qos_with_signaling_indication_flag_residual_bit_error_ratio: Qmi.WdsSduResidualBitErrorRatio, value_umts_requested_qos_with_signaling_indication_flag_delivery_erroneous_sdu: Qmi.WdsSduErroneousDelivery, value_umts_requested_qos_with_signaling_indication_flag_transfer_delay: int, value_umts_requested_qos_with_signaling_indication_flag_traffic_handling_priority: int, value_umts_requested_qos_with_signaling_indication_flag_signaling_indication: int)

Get the ‘UMTS Requested QoS With Signaling Indication Flag’ field from self.

New in version 1.18.

get_username()
Raises:

GLib.Error

Returns:

True if the field is found, False otherwise.

value_username:

a placeholder for the output constant string, or None if not required.

Return type:

(bool, value_username: str)

Get the ‘Username’ field from self.

New in version 1.18.

ref()
Returns:

the new reference to self.

Return type:

Qmi.MessageWdsCreateProfileInput

Atomically increments the reference count of self by one.

New in version 1.18.

set_apn_disabled_flag(value_apn_disabled_flag)
Parameters:

value_apn_disabled_flag (bool) – a bool.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘APN Disabled Flag’ field in the message.

New in version 1.22.

set_apn_name(value_apn_name)
Parameters:

value_apn_name (str) – a constant string.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘APN Name’ field in the message.

New in version 1.18.

set_apn_type_mask(value_apn_type_mask)
Parameters:

value_apn_type_mask (Qmi.WdsApnTypeMask) – a Qmi.WdsApnTypeMask.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘APN Type Mask’ field in the message.

New in version 1.30.

set_authentication(value_authentication)
Parameters:

value_authentication (Qmi.WdsAuthentication) – a Qmi.WdsAuthentication.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘Authentication’ field in the message.

New in version 1.18.

set_gprs_minimum_qos(value_gprs_minimum_qos_precedence_class, value_gprs_minimum_qos_delay_class, value_gprs_minimum_qos_reliability_class, value_gprs_minimum_qos_peak_throughput_class, value_gprs_minimum_qos_mean_throughput_class)
Parameters:
  • value_gprs_minimum_qos_precedence_class (int) – a #guint32.

  • value_gprs_minimum_qos_delay_class (int) – a #guint32.

  • value_gprs_minimum_qos_reliability_class (int) – a #guint32.

  • value_gprs_minimum_qos_peak_throughput_class (int) – a #guint32.

  • value_gprs_minimum_qos_mean_throughput_class (int) – a #guint32.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘GPRS Minimum QoS’ field in the message.

New in version 1.18.

set_gprs_requested_qos(value_gprs_requested_qos_precedence_class, value_gprs_requested_qos_delay_class, value_gprs_requested_qos_reliability_class, value_gprs_requested_qos_peak_throughput_class, value_gprs_requested_qos_mean_throughput_class)
Parameters:
  • value_gprs_requested_qos_precedence_class (int) – a #guint32.

  • value_gprs_requested_qos_delay_class (int) – a #guint32.

  • value_gprs_requested_qos_reliability_class (int) – a #guint32.

  • value_gprs_requested_qos_peak_throughput_class (int) – a #guint32.

  • value_gprs_requested_qos_mean_throughput_class (int) – a #guint32.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘GPRS Requested QoS’ field in the message.

New in version 1.18.

set_imcn_flag(value_imcn_flag)
Parameters:

value_imcn_flag (bool) – a bool.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘IMCN Flag’ field in the message.

New in version 1.18.

set_ipv4_address_preference(value_ipv4_address_preference)
Parameters:

value_ipv4_address_preference (int) – a #guint32.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘IPv4 Address Preference’ field in the message.

New in version 1.18.

set_ipv6_address_preference(value_ipv6_address_preference_address)
Parameters:

value_ipv6_address_preference_address ([int]) – a GLib.Array of #guint16 elements. A new reference to value_ipv6_address_preference_address will be taken, so the caller must make sure the array was created with the correct GLib.DestroyNotify as clear function for each element in the array.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘IPv6 Address Preference’ field in the message.

New in version 1.18.

set_ipv6_primary_dns_address_preference(value_ipv6_primary_dns_address_preference)
Parameters:

value_ipv6_primary_dns_address_preference ([int]) – a GLib.Array of #guint16 elements. A new reference to value_ipv6_primary_dns_address_preference will be taken, so the caller must make sure the array was created with the correct GLib.DestroyNotify as clear function for each element in the array.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘IPv6 Primary DNS Address Preference’ field in the message.

New in version 1.18.

set_ipv6_secondary_dns_address_preference(value_ipv6_secondary_dns_address_preference)
Parameters:

value_ipv6_secondary_dns_address_preference ([int]) – a GLib.Array of #guint16 elements. A new reference to value_ipv6_secondary_dns_address_preference will be taken, so the caller must make sure the array was created with the correct GLib.DestroyNotify as clear function for each element in the array.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘IPv6 Secondary DNS Address Preference’ field in the message.

New in version 1.18.

set_lte_qos_parameters(value_lte_qos_parameters_qos_class_identifier, value_lte_qos_parameters_guaranteed_downlink_bitrate, value_lte_qos_parameters_max_downlink_bitrate, value_lte_qos_parameters_guaranteed_uplink_bitrate, value_lte_qos_parameters_max_uplink_bitrate)
Parameters:
  • value_lte_qos_parameters_qos_class_identifier (Qmi.WdsQosClassIdentifier) – a Qmi.WdsQosClassIdentifier.

  • value_lte_qos_parameters_guaranteed_downlink_bitrate (int) – a #guint32.

  • value_lte_qos_parameters_max_downlink_bitrate (int) – a #guint32.

  • value_lte_qos_parameters_guaranteed_uplink_bitrate (int) – a #guint32.

  • value_lte_qos_parameters_max_uplink_bitrate (int) – a #guint32.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘LTE QoS Parameters’ field in the message.

New in version 1.18.

set_password(value_password)
Parameters:

value_password (str) – a constant string.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘Password’ field in the message.

New in version 1.18.

set_pcscf_address_using_dhcp(value_pcscf_address_using_dhcp)
Parameters:

value_pcscf_address_using_dhcp (bool) – a bool.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘PCSCF Address Using DHCP’ field in the message.

New in version 1.18.

set_pcscf_address_using_pco(value_pcscf_address_using_pco)
Parameters:

value_pcscf_address_using_pco (bool) – a bool.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘PCSCF Address Using PCO’ field in the message.

New in version 1.18.

set_pdp_context_number(value_pdp_context_number)
Parameters:

value_pdp_context_number (int) – a #guint8.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘PDP Context Number’ field in the message.

New in version 1.18.

set_pdp_context_primary_id(value_pdp_context_primary_id)
Parameters:

value_pdp_context_primary_id (int) – a #guint8.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘PDP Context Primary ID’ field in the message.

New in version 1.18.

set_pdp_context_secondary_flag(value_pdp_context_secondary_flag)
Parameters:

value_pdp_context_secondary_flag (bool) – a bool.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘PDP Context Secondary Flag’ field in the message.

New in version 1.18.

set_pdp_data_compression_type(value_pdp_data_compression_type)
Parameters:

value_pdp_data_compression_type (Qmi.WdsPdpDataCompressionType) – a Qmi.WdsPdpDataCompressionType.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘PDP Data Compression Type’ field in the message.

New in version 1.18.

set_pdp_header_compression_type(value_pdp_header_compression_type)
Parameters:

value_pdp_header_compression_type (Qmi.WdsPdpHeaderCompressionType) – a Qmi.WdsPdpHeaderCompressionType.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘PDP Header Compression Type’ field in the message.

New in version 1.18.

set_pdp_type(value_pdp_type)
Parameters:

value_pdp_type (Qmi.WdsPdpType) – a Qmi.WdsPdpType.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘PDP Type’ field in the message.

New in version 1.18.

set_primary_ipv4_dns_address(value_primary_ipv4_dns_address)
Parameters:

value_primary_ipv4_dns_address (int) – a #guint32.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘Primary IPv4 DNS Address’ field in the message.

New in version 1.18.

set_profile_name(value_profile_name)
Parameters:

value_profile_name (str) – a constant string.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘Profile Name’ field in the message.

New in version 1.18.

set_profile_type(value_profile_type)
Parameters:

value_profile_type (Qmi.WdsProfileType) – a Qmi.WdsProfileType.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘Profile Type’ field in the message.

New in version 1.18.

set_roaming_disallowed_flag(value_roaming_disallowed_flag)
Parameters:

value_roaming_disallowed_flag (bool) – a bool.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘Roaming Disallowed Flag’ field in the message.

New in version 1.22.

set_secondary_ipv4_dns_address(value_secondary_ipv4_dns_address)
Parameters:

value_secondary_ipv4_dns_address (int) – a #guint32.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘Secondary IPv4 DNS Address’ field in the message.

New in version 1.18.

set_umts_minimum_qos(value_umts_minimum_qos_traffic_class, value_umts_minimum_qos_max_uplink_bitrate, value_umts_minimum_qos_max_downlink_bitrate, value_umts_minimum_qos_guaranteed_uplink_bitrate, value_umts_minimum_qos_guaranteed_downlink_bitrate, value_umts_minimum_qos_qos_delivery_order, value_umts_minimum_qos_maximum_sdu_size, value_umts_minimum_qos_sdu_error_ratio, value_umts_minimum_qos_residual_bit_error_ratio, value_umts_minimum_qos_delivery_erroneous_sdu, value_umts_minimum_qos_transfer_delay, value_umts_minimum_qos_traffic_handling_priority)
Parameters:
Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘UMTS Minimum QoS’ field in the message.

New in version 1.18.

set_umts_minimum_qos_with_signaling_indication_flag(value_umts_minimum_qos_with_signaling_indication_flag_traffic_class, value_umts_minimum_qos_with_signaling_indication_flag_max_uplink_bitrate, value_umts_minimum_qos_with_signaling_indication_flag_max_downlink_bitrate, value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate, value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate, value_umts_minimum_qos_with_signaling_indication_flag_qos_delivery_order, value_umts_minimum_qos_with_signaling_indication_flag_maximum_sdu_size, value_umts_minimum_qos_with_signaling_indication_flag_sdu_error_ratio, value_umts_minimum_qos_with_signaling_indication_flag_residual_bit_error_ratio, value_umts_minimum_qos_with_signaling_indication_flag_delivery_erroneous_sdu, value_umts_minimum_qos_with_signaling_indication_flag_transfer_delay, value_umts_minimum_qos_with_signaling_indication_flag_traffic_handling_priority, value_umts_minimum_qos_with_signaling_indication_flag_signaling_indication)
Parameters:
  • value_umts_minimum_qos_with_signaling_indication_flag_traffic_class (Qmi.WdsTrafficClass) – a Qmi.WdsTrafficClass.

  • value_umts_minimum_qos_with_signaling_indication_flag_max_uplink_bitrate (int) – a #guint32.

  • value_umts_minimum_qos_with_signaling_indication_flag_max_downlink_bitrate (int) – a #guint32.

  • value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate (int) – a #guint32.

  • value_umts_minimum_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate (int) – a #guint32.

  • value_umts_minimum_qos_with_signaling_indication_flag_qos_delivery_order (Qmi.WdsDeliveryOrder) – a Qmi.WdsDeliveryOrder.

  • value_umts_minimum_qos_with_signaling_indication_flag_maximum_sdu_size (int) – a #guint32.

  • value_umts_minimum_qos_with_signaling_indication_flag_sdu_error_ratio (Qmi.WdsSduErrorRatio) – a Qmi.WdsSduErrorRatio.

  • value_umts_minimum_qos_with_signaling_indication_flag_residual_bit_error_ratio (Qmi.WdsSduResidualBitErrorRatio) – a Qmi.WdsSduResidualBitErrorRatio.

  • value_umts_minimum_qos_with_signaling_indication_flag_delivery_erroneous_sdu (Qmi.WdsSduErroneousDelivery) – a Qmi.WdsSduErroneousDelivery.

  • value_umts_minimum_qos_with_signaling_indication_flag_transfer_delay (int) – a #guint32.

  • value_umts_minimum_qos_with_signaling_indication_flag_traffic_handling_priority (int) – a #guint32.

  • value_umts_minimum_qos_with_signaling_indication_flag_signaling_indication (int) – a #gint8.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘UMTS Minimum QoS With Signaling Indication Flag’ field in the message.

New in version 1.18.

set_umts_requested_qos(value_umts_requested_qos_traffic_class, value_umts_requested_qos_max_uplink_bitrate, value_umts_requested_qos_max_downlink_bitrate, value_umts_requested_qos_guaranteed_uplink_bitrate, value_umts_requested_qos_guaranteed_downlink_bitrate, value_umts_requested_qos_qos_delivery_order, value_umts_requested_qos_maximum_sdu_size, value_umts_requested_qos_sdu_error_ratio, value_umts_requested_qos_residual_bit_error_ratio, value_umts_requested_qos_delivery_erroneous_sdu, value_umts_requested_qos_transfer_delay, value_umts_requested_qos_traffic_handling_priority)
Parameters:
Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘UMTS Requested QoS’ field in the message.

New in version 1.18.

set_umts_requested_qos_with_signaling_indication_flag(value_umts_requested_qos_with_signaling_indication_flag_traffic_class, value_umts_requested_qos_with_signaling_indication_flag_max_uplink_bitrate, value_umts_requested_qos_with_signaling_indication_flag_max_downlink_bitrate, value_umts_requested_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate, value_umts_requested_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate, value_umts_requested_qos_with_signaling_indication_flag_qos_delivery_order, value_umts_requested_qos_with_signaling_indication_flag_maximum_sdu_size, value_umts_requested_qos_with_signaling_indication_flag_sdu_error_ratio, value_umts_requested_qos_with_signaling_indication_flag_residual_bit_error_ratio, value_umts_requested_qos_with_signaling_indication_flag_delivery_erroneous_sdu, value_umts_requested_qos_with_signaling_indication_flag_transfer_delay, value_umts_requested_qos_with_signaling_indication_flag_traffic_handling_priority, value_umts_requested_qos_with_signaling_indication_flag_signaling_indication)
Parameters:
  • value_umts_requested_qos_with_signaling_indication_flag_traffic_class (Qmi.WdsTrafficClass) – a Qmi.WdsTrafficClass.

  • value_umts_requested_qos_with_signaling_indication_flag_max_uplink_bitrate (int) – a #guint32.

  • value_umts_requested_qos_with_signaling_indication_flag_max_downlink_bitrate (int) – a #guint32.

  • value_umts_requested_qos_with_signaling_indication_flag_guaranteed_uplink_bitrate (int) – a #guint32.

  • value_umts_requested_qos_with_signaling_indication_flag_guaranteed_downlink_bitrate (int) – a #guint32.

  • value_umts_requested_qos_with_signaling_indication_flag_qos_delivery_order (Qmi.WdsDeliveryOrder) – a Qmi.WdsDeliveryOrder.

  • value_umts_requested_qos_with_signaling_indication_flag_maximum_sdu_size (int) – a #guint32.

  • value_umts_requested_qos_with_signaling_indication_flag_sdu_error_ratio (Qmi.WdsSduErrorRatio) – a Qmi.WdsSduErrorRatio.

  • value_umts_requested_qos_with_signaling_indication_flag_residual_bit_error_ratio (Qmi.WdsSduResidualBitErrorRatio) – a Qmi.WdsSduResidualBitErrorRatio.

  • value_umts_requested_qos_with_signaling_indication_flag_delivery_erroneous_sdu (Qmi.WdsSduErroneousDelivery) – a Qmi.WdsSduErroneousDelivery.

  • value_umts_requested_qos_with_signaling_indication_flag_transfer_delay (int) – a #guint32.

  • value_umts_requested_qos_with_signaling_indication_flag_traffic_handling_priority (int) – a #guint32.

  • value_umts_requested_qos_with_signaling_indication_flag_signaling_indication (int) – a #gint8.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘UMTS Requested QoS With Signaling Indication Flag’ field in the message.

New in version 1.18.

set_username(value_username)
Parameters:

value_username (str) – a constant string.

Raises:

GLib.Error

Returns:

True if value was successfully set, False otherwise.

Return type:

bool

Set the ‘Username’ field in the message.

New in version 1.18.

unref()

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

New in version 1.18.