UDisks.DriveAta

Implementations:

UDisks.DriveAtaProxy, UDisks.DriveAtaSkeleton

Methods

class	interface_info ()
class	override_properties (klass, property_id_begin)
	call_pm_get_state (arg_options, cancellable, callback, *user_data)
	call_pm_get_state_finish (res)
	call_pm_get_state_sync (arg_options, cancellable)
	call_pm_standby (arg_options, cancellable, callback, *user_data)
	call_pm_standby_finish (res)
	call_pm_standby_sync (arg_options, cancellable)
	call_pm_wakeup (arg_options, cancellable, callback, *user_data)
	call_pm_wakeup_finish (res)
	call_pm_wakeup_sync (arg_options, cancellable)
	call_security_erase_unit (arg_options, cancellable, callback, *user_data)
	call_security_erase_unit_finish (res)
	call_security_erase_unit_sync (arg_options, cancellable)
	call_smart_get_attributes (arg_options, cancellable, callback, *user_data)
	call_smart_get_attributes_finish (res)
	call_smart_get_attributes_sync (arg_options, cancellable)
	call_smart_selftest_abort (arg_options, cancellable, callback, *user_data)
	call_smart_selftest_abort_finish (res)
	call_smart_selftest_abort_sync (arg_options, cancellable)
	call_smart_selftest_start (arg_type, arg_options, cancellable, callback, *user_data)
	call_smart_selftest_start_finish (res)
	call_smart_selftest_start_sync (arg_type, arg_options, cancellable)
	call_smart_set_enabled (arg_value, arg_options, cancellable, callback, *user_data)
	call_smart_set_enabled_finish (res)
	call_smart_set_enabled_sync (arg_value, arg_options, cancellable)
	call_smart_update (arg_options, cancellable, callback, *user_data)
	call_smart_update_finish (res)
	call_smart_update_sync (arg_options, cancellable)
	complete_pm_get_state (invocation, state)
	complete_pm_standby (invocation)
	complete_pm_wakeup (invocation)
	complete_security_erase_unit (invocation)
	complete_smart_get_attributes (invocation, attributes)
	complete_smart_selftest_abort (invocation)
	complete_smart_selftest_start (invocation)
	complete_smart_set_enabled (invocation)
	complete_smart_update (invocation)

Virtual Methods

	do_handle_pm_get_state (invocation, arg_options)
	do_handle_pm_standby (invocation, arg_options)
	do_handle_pm_wakeup (invocation, arg_options)
	do_handle_security_erase_unit (invocation, arg_options)
	do_handle_smart_get_attributes (invocation, arg_options)
	do_handle_smart_selftest_abort (invocation, arg_options)
	do_handle_smart_selftest_start (invocation, arg_type, arg_options)
	do_handle_smart_set_enabled (invocation, arg_value, arg_options)
	do_handle_smart_update (invocation, arg_options)

Properties

Name	Type	Flags	Short Description
aam-enabled	bool	r/w	AamEnabled
aam-supported	bool	r/w	AamSupported
aam-vendor-recommended-value	int	r/w	AamVendorRecommendedValue
apm-enabled	bool	r/w	ApmEnabled
apm-supported	bool	r/w	ApmSupported
pm-enabled	bool	r/w	PmEnabled
pm-supported	bool	r/w	PmSupported
read-lookahead-enabled	bool	r/w	ReadLookaheadEnabled
read-lookahead-supported	bool	r/w	ReadLookaheadSupported
security-enhanced-erase-unit-minutes	int	r/w	SecurityEnhancedEraseUnitMinutes
security-erase-unit-minutes	int	r/w	SecurityEraseUnitMinutes
security-frozen	bool	r/w	SecurityFrozen
smart-enabled	bool	r/w	SmartEnabled
smart-failing	bool	r/w	SmartFailing
smart-num-attributes-failed-in-the-past	int	r/w	SmartNumAttributesFailedInThePast
smart-num-attributes-failing	int	r/w	SmartNumAttributesFailing
smart-num-bad-sectors	int	r/w	SmartNumBadSectors
smart-power-on-seconds	int	r/w	SmartPowerOnSeconds
smart-selftest-percent-remaining	int	r/w	SmartSelftestPercentRemaining
smart-selftest-status	str	r/w	SmartSelftestStatus
smart-supported	bool	r/w	SmartSupported
smart-temperature	float	r/w	SmartTemperature
smart-updated	int	r/w	SmartUpdated
write-cache-enabled	bool	r/w	WriteCacheEnabled
write-cache-supported	bool	r/w	WriteCacheSupported

Signals

Name	Short Description
handle-pm-get-state	Signal emitted when a remote caller is invoking the PmGetState() D-Bus method.
handle-pm-standby	Signal emitted when a remote caller is invoking the PmStandby() D-Bus method.
handle-pm-wakeup	Signal emitted when a remote caller is invoking the PmWakeup() D-Bus method.
handle-security-erase-unit	Signal emitted when a remote caller is invoking the SecurityEraseUnit() D-Bus method.
handle-smart-get-attributes	Signal emitted when a remote caller is invoking the SmartGetAttributes() D-Bus method.
handle-smart-selftest-abort	Signal emitted when a remote caller is invoking the SmartSelftestAbort() D-Bus method.
handle-smart-selftest-start	Signal emitted when a remote caller is invoking the SmartSelftestStart() D-Bus method.
handle-smart-set-enabled	Signal emitted when a remote caller is invoking the SmartSetEnabled() D-Bus method.
handle-smart-update	Signal emitted when a remote caller is invoking the SmartUpdate() D-Bus method.

Fields

None

Class Details

class UDisks.DriveAta

Bases:

GObject.GInterface

Structure:

UDisks.DriveAtaIface

Abstract interface type for the D-Bus interface org.freedesktop.UDisks2.Drive.Ata.

classmethod interface_info()

Returns:

A Gio.DBusInterfaceInfo. Do not free.

Return type:

Gio.DBusInterfaceInfo

Gets a machine-readable description of the org.freedesktop.UDisks2.Drive.Ata D-Bus interface.

classmethod override_properties(klass, property_id_begin)

Parameters:

• klass (GObject.ObjectClass) – The class structure for a GObject.Object derived class.

• property_id_begin (int) – The property id to assign to the first overridden property.

Returns:

The last property id.

Return type:

int

Overrides all GObject.Object properties in the UDisks.DriveAta interface for a concrete class. The properties are overridden in the order they are defined.

call_pm_get_state(arg_options, cancellable, callback, *user_data)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.

• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the PmGetState() D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call UDisks.DriveAta.call_pm_get_state_finish() to get the result of the operation.

See UDisks.DriveAta.call_pm_get_state_sync() for the synchronous, blocking version of this method.

call_pm_get_state_finish(res)

Parameters:

res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to UDisks.DriveAta.call_pm_get_state().

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_state:

Return location for return parameter or None to ignore.

Return type:

(bool, out_state: int)

Finishes an operation started with UDisks.DriveAta.call_pm_get_state().

call_pm_get_state_sync(arg_options, cancellable)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_state:

Return location for return parameter or None to ignore.

Return type:

(bool, out_state: int)

Synchronously invokes the PmGetState() D-Bus method on self. The calling thread is blocked until a reply is received.

See UDisks.DriveAta.call_pm_get_state() for the asynchronous version of this method.

call_pm_standby(arg_options, cancellable, callback, *user_data)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.

• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the PmStandby() D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call UDisks.DriveAta.call_pm_standby_finish() to get the result of the operation.

See UDisks.DriveAta.call_pm_standby_sync() for the synchronous, blocking version of this method.

call_pm_standby_finish(res)

Parameters:

res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to UDisks.DriveAta.call_pm_standby().

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Finishes an operation started with UDisks.DriveAta.call_pm_standby().

call_pm_standby_sync(arg_options, cancellable)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the PmStandby() D-Bus method on self. The calling thread is blocked until a reply is received.

See UDisks.DriveAta.call_pm_standby() for the asynchronous version of this method.

call_pm_wakeup(arg_options, cancellable, callback, *user_data)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.

• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the PmWakeup() D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call UDisks.DriveAta.call_pm_wakeup_finish() to get the result of the operation.

See UDisks.DriveAta.call_pm_wakeup_sync() for the synchronous, blocking version of this method.

call_pm_wakeup_finish(res)

Parameters:

res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to UDisks.DriveAta.call_pm_wakeup().

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Finishes an operation started with UDisks.DriveAta.call_pm_wakeup().

call_pm_wakeup_sync(arg_options, cancellable)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the PmWakeup() D-Bus method on self. The calling thread is blocked until a reply is received.

See UDisks.DriveAta.call_pm_wakeup() for the asynchronous version of this method.

call_security_erase_unit(arg_options, cancellable, callback, *user_data)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.

• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the SecurityEraseUnit() D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call UDisks.DriveAta.call_security_erase_unit_finish() to get the result of the operation.

See UDisks.DriveAta.call_security_erase_unit_sync() for the synchronous, blocking version of this method.

call_security_erase_unit_finish(res)

Parameters:

res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to UDisks.DriveAta.call_security_erase_unit().

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Finishes an operation started with UDisks.DriveAta.call_security_erase_unit().

call_security_erase_unit_sync(arg_options, cancellable)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the SecurityEraseUnit() D-Bus method on self. The calling thread is blocked until a reply is received.

See UDisks.DriveAta.call_security_erase_unit() for the asynchronous version of this method.

call_smart_get_attributes(arg_options, cancellable, callback, *user_data)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.

• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the SmartGetAttributes() D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call UDisks.DriveAta.call_smart_get_attributes_finish() to get the result of the operation.

See UDisks.DriveAta.call_smart_get_attributes_sync() for the synchronous, blocking version of this method.

call_smart_get_attributes_finish(res)

Parameters:

res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to UDisks.DriveAta.call_smart_get_attributes().

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_attributes:

Return location for return parameter or None to ignore.

Return type:

(bool, out_attributes: GLib.Variant)

Finishes an operation started with UDisks.DriveAta.call_smart_get_attributes().

call_smart_get_attributes_sync(arg_options, cancellable)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_attributes:

Return location for return parameter or None to ignore.

Return type:

(bool, out_attributes: GLib.Variant)

Synchronously invokes the SmartGetAttributes() D-Bus method on self. The calling thread is blocked until a reply is received.

See UDisks.DriveAta.call_smart_get_attributes() for the asynchronous version of this method.

call_smart_selftest_abort(arg_options, cancellable, callback, *user_data)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.

• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the SmartSelftestAbort() D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call UDisks.DriveAta.call_smart_selftest_abort_finish() to get the result of the operation.

See UDisks.DriveAta.call_smart_selftest_abort_sync() for the synchronous, blocking version of this method.

call_smart_selftest_abort_finish(res)

Parameters:

res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to UDisks.DriveAta.call_smart_selftest_abort().

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Finishes an operation started with UDisks.DriveAta.call_smart_selftest_abort().

call_smart_selftest_abort_sync(arg_options, cancellable)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the SmartSelftestAbort() D-Bus method on self. The calling thread is blocked until a reply is received.

See UDisks.DriveAta.call_smart_selftest_abort() for the asynchronous version of this method.

call_smart_selftest_start(arg_type, arg_options, cancellable, callback, *user_data)

Parameters:

• arg_type (str) – Argument to pass with the method invocation.

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.

• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the SmartSelftestStart() D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call UDisks.DriveAta.call_smart_selftest_start_finish() to get the result of the operation.

See UDisks.DriveAta.call_smart_selftest_start_sync() for the synchronous, blocking version of this method.

call_smart_selftest_start_finish(res)

Parameters:

res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to UDisks.DriveAta.call_smart_selftest_start().

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Finishes an operation started with UDisks.DriveAta.call_smart_selftest_start().

call_smart_selftest_start_sync(arg_type, arg_options, cancellable)

Parameters:

• arg_type (str) – Argument to pass with the method invocation.

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the SmartSelftestStart() D-Bus method on self. The calling thread is blocked until a reply is received.

See UDisks.DriveAta.call_smart_selftest_start() for the asynchronous version of this method.

call_smart_set_enabled(arg_value, arg_options, cancellable, callback, *user_data)

Parameters:

• arg_value (bool) – Argument to pass with the method invocation.

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.

• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the SmartSetEnabled() D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call UDisks.DriveAta.call_smart_set_enabled_finish() to get the result of the operation.

See UDisks.DriveAta.call_smart_set_enabled_sync() for the synchronous, blocking version of this method.

New in version 2.0.0.

call_smart_set_enabled_finish(res)

Parameters:

res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to UDisks.DriveAta.call_smart_set_enabled().

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Finishes an operation started with UDisks.DriveAta.call_smart_set_enabled().

New in version 2.0.0.

call_smart_set_enabled_sync(arg_value, arg_options, cancellable)

Parameters:

• arg_value (bool) – Argument to pass with the method invocation.

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the SmartSetEnabled() D-Bus method on self. The calling thread is blocked until a reply is received.

See UDisks.DriveAta.call_smart_set_enabled() for the asynchronous version of this method.

New in version 2.0.0.

call_smart_update(arg_options, cancellable, callback, *user_data)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.

• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the SmartUpdate() D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call UDisks.DriveAta.call_smart_update_finish() to get the result of the operation.

See UDisks.DriveAta.call_smart_update_sync() for the synchronous, blocking version of this method.

call_smart_update_finish(res)

Parameters:

res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to UDisks.DriveAta.call_smart_update().

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Finishes an operation started with UDisks.DriveAta.call_smart_update().

call_smart_update_sync(arg_options, cancellable)

Parameters:

• arg_options (GLib.Variant) – Argument to pass with the method invocation.

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the SmartUpdate() D-Bus method on self. The calling thread is blocked until a reply is received.

See UDisks.DriveAta.call_smart_update() for the asynchronous version of this method.

complete_pm_get_state(invocation, state)

Parameters:

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• state (int) – Parameter to return.

Helper function used in service implementations to finish handling invocations of the PmGetState() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_pm_standby(invocation)

Parameters:

invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the PmStandby() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_pm_wakeup(invocation)

Parameters:

invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the PmWakeup() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_security_erase_unit(invocation)

Parameters:

invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the SecurityEraseUnit() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_smart_get_attributes(invocation, attributes)

Parameters:

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• attributes (GLib.Variant) – Parameter to return.

Helper function used in service implementations to finish handling invocations of the SmartGetAttributes() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_smart_selftest_abort(invocation)

Parameters:

invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the SmartSelftestAbort() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_smart_selftest_start(invocation)

Parameters:

invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the SmartSelftestStart() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_smart_set_enabled(invocation)

Parameters:

invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the SmartSetEnabled() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

New in version 2.0.0.

complete_smart_update(invocation)

Parameters:

invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the SmartUpdate() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

do_handle_pm_get_state(invocation, arg_options) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –

• arg_options (GLib.Variant) –

Return type:

bool

Handler for the UDisks.DriveAta ::handle-pm-get-state signal.

do_handle_pm_standby(invocation, arg_options) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –

• arg_options (GLib.Variant) –

Return type:

bool

Handler for the UDisks.DriveAta ::handle-pm-standby signal.

do_handle_pm_wakeup(invocation, arg_options) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –

• arg_options (GLib.Variant) –

Return type:

bool

Handler for the UDisks.DriveAta ::handle-pm-wakeup signal.

do_handle_security_erase_unit(invocation, arg_options) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –

• arg_options (GLib.Variant) –

Return type:

bool

Handler for the UDisks.DriveAta ::handle-security-erase-unit signal.

do_handle_smart_get_attributes(invocation, arg_options) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –

• arg_options (GLib.Variant) –

Return type:

bool

Handler for the UDisks.DriveAta ::handle-smart-get-attributes signal.

do_handle_smart_selftest_abort(invocation, arg_options) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –

• arg_options (GLib.Variant) –

Return type:

bool

Handler for the UDisks.DriveAta ::handle-smart-selftest-abort signal.

do_handle_smart_selftest_start(invocation, arg_type, arg_options) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –

• arg_type (str) –

• arg_options (GLib.Variant) –

Return type:

bool

Handler for the UDisks.DriveAta ::handle-smart-selftest-start signal.

do_handle_smart_set_enabled(invocation, arg_value, arg_options) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –

• arg_value (bool) –

• arg_options (GLib.Variant) –

Return type:

bool

Handler for the UDisks.DriveAta ::handle-smart-set-enabled signal.

do_handle_smart_update(invocation, arg_options) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –

• arg_options (GLib.Variant) –

Return type:

bool

Handler for the UDisks.DriveAta ::handle-smart-update signal.

Signal Details

UDisks.DriveAta.signals.handle_pm_get_state(drive_ata, invocation, arg_options)

Signal Name:

handle-pm-get-state

Flags:

RUN_LAST

Parameters:

• drive_ata (UDisks.DriveAta) – The object which received the signal

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• arg_options (GLib.Variant) – Argument passed by remote caller.

Returns:

Gio.DBUS_METHOD_INVOCATION_HANDLED or True if the invocation was handled, Gio.DBUS_METHOD_INVOCATION_UNHANDLED or False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the PmGetState() D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call UDisks.DriveAta.complete_pm_get_state() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

UDisks.DriveAta.signals.handle_pm_standby(drive_ata, invocation, arg_options)

Signal Name:

handle-pm-standby

Flags:

RUN_LAST

Parameters:

• drive_ata (UDisks.DriveAta) – The object which received the signal

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• arg_options (GLib.Variant) – Argument passed by remote caller.

Returns:

Gio.DBUS_METHOD_INVOCATION_HANDLED or True if the invocation was handled, Gio.DBUS_METHOD_INVOCATION_UNHANDLED or False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the PmStandby() D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call UDisks.DriveAta.complete_pm_standby() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

UDisks.DriveAta.signals.handle_pm_wakeup(drive_ata, invocation, arg_options)

Signal Name:

handle-pm-wakeup

Flags:

RUN_LAST

Parameters:

• drive_ata (UDisks.DriveAta) – The object which received the signal

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• arg_options (GLib.Variant) – Argument passed by remote caller.

Returns:

Gio.DBUS_METHOD_INVOCATION_HANDLED or True if the invocation was handled, Gio.DBUS_METHOD_INVOCATION_UNHANDLED or False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the PmWakeup() D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call UDisks.DriveAta.complete_pm_wakeup() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

UDisks.DriveAta.signals.handle_security_erase_unit(drive_ata, invocation, arg_options)

Signal Name:

handle-security-erase-unit

Flags:

RUN_LAST

Parameters:

• drive_ata (UDisks.DriveAta) – The object which received the signal

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• arg_options (GLib.Variant) – Argument passed by remote caller.

Returns:

Gio.DBUS_METHOD_INVOCATION_HANDLED or True if the invocation was handled, Gio.DBUS_METHOD_INVOCATION_UNHANDLED or False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the SecurityEraseUnit() D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call UDisks.DriveAta.complete_security_erase_unit() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

UDisks.DriveAta.signals.handle_smart_get_attributes(drive_ata, invocation, arg_options)

Signal Name:

handle-smart-get-attributes

Flags:

RUN_LAST

Parameters:

• drive_ata (UDisks.DriveAta) – The object which received the signal

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• arg_options (GLib.Variant) – Argument passed by remote caller.

Returns:

Gio.DBUS_METHOD_INVOCATION_HANDLED or True if the invocation was handled, Gio.DBUS_METHOD_INVOCATION_UNHANDLED or False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the SmartGetAttributes() D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call UDisks.DriveAta.complete_smart_get_attributes() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

UDisks.DriveAta.signals.handle_smart_selftest_abort(drive_ata, invocation, arg_options)

Signal Name:

handle-smart-selftest-abort

Flags:

RUN_LAST

Parameters:

• drive_ata (UDisks.DriveAta) – The object which received the signal

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• arg_options (GLib.Variant) – Argument passed by remote caller.

Returns:

Gio.DBUS_METHOD_INVOCATION_HANDLED or True if the invocation was handled, Gio.DBUS_METHOD_INVOCATION_UNHANDLED or False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the SmartSelftestAbort() D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call UDisks.DriveAta.complete_smart_selftest_abort() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

UDisks.DriveAta.signals.handle_smart_selftest_start(drive_ata, invocation, arg_type, arg_options)

Signal Name:

handle-smart-selftest-start

Flags:

RUN_LAST

Parameters:

• drive_ata (UDisks.DriveAta) – The object which received the signal

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• arg_type (str) – Argument passed by remote caller.

• arg_options (GLib.Variant) – Argument passed by remote caller.

Returns:

Gio.DBUS_METHOD_INVOCATION_HANDLED or True if the invocation was handled, Gio.DBUS_METHOD_INVOCATION_UNHANDLED or False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the SmartSelftestStart() D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call UDisks.DriveAta.complete_smart_selftest_start() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

UDisks.DriveAta.signals.handle_smart_set_enabled(drive_ata, invocation, arg_value, arg_options)

Signal Name:

handle-smart-set-enabled

Flags:

RUN_LAST

Parameters:

• drive_ata (UDisks.DriveAta) – The object which received the signal

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• arg_value (bool) – Argument passed by remote caller.

• arg_options (GLib.Variant) – Argument passed by remote caller.

Returns:

Gio.DBUS_METHOD_INVOCATION_HANDLED or True if the invocation was handled, Gio.DBUS_METHOD_INVOCATION_UNHANDLED or False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the SmartSetEnabled() D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call UDisks.DriveAta.complete_smart_set_enabled() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

New in version 2.0.0.

UDisks.DriveAta.signals.handle_smart_update(drive_ata, invocation, arg_options)

Signal Name:

handle-smart-update

Flags:

RUN_LAST

Parameters:

• drive_ata (UDisks.DriveAta) – The object which received the signal

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

• arg_options (GLib.Variant) – Argument passed by remote caller.

Returns:

Gio.DBUS_METHOD_INVOCATION_HANDLED or True if the invocation was handled, Gio.DBUS_METHOD_INVOCATION_UNHANDLED or False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the SmartUpdate() D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call UDisks.DriveAta.complete_smart_update() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

Property Details

UDisks.DriveAta.props.aam_enabled

Name:

aam-enabled

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “AamEnabled”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.aam_supported

Name:

aam-supported

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “AamSupported”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.aam_vendor_recommended_value

Name:

aam-vendor-recommended-value

Type:

int

Default Value:

0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “AamVendorRecommendedValue”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.apm_enabled

Name:

apm-enabled

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “ApmEnabled”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.apm_supported

Name:

apm-supported

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “ApmSupported”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.pm_enabled

Name:

pm-enabled

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “PmEnabled”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.pm_supported

Name:

pm-supported

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “PmSupported”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.read_lookahead_enabled

Name:

read-lookahead-enabled

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “ReadLookaheadEnabled”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.read_lookahead_supported

Name:

read-lookahead-supported

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “ReadLookaheadSupported”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.security_enhanced_erase_unit_minutes

Name:

security-enhanced-erase-unit-minutes

Type:

int

Default Value:

0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SecurityEnhancedEraseUnitMinutes”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.security_erase_unit_minutes

Name:

security-erase-unit-minutes

Type:

int

Default Value:

0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SecurityEraseUnitMinutes”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.security_frozen

Name:

security-frozen

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SecurityFrozen”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_enabled

Name:

smart-enabled

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartEnabled”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_failing

Name:

smart-failing

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartFailing”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_num_attributes_failed_in_the_past

Name:

smart-num-attributes-failed-in-the-past

Type:

int

Default Value:

0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartNumAttributesFailedInThePast”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_num_attributes_failing

Name:

smart-num-attributes-failing

Type:

int

Default Value:

0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartNumAttributesFailing”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_num_bad_sectors

Name:

smart-num-bad-sectors

Type:

int

Default Value:

0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartNumBadSectors”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_power_on_seconds

Name:

smart-power-on-seconds

Type:

int

Default Value:

0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartPowerOnSeconds”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_selftest_percent_remaining

Name:

smart-selftest-percent-remaining

Type:

int

Default Value:

0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartSelftestPercentRemaining”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_selftest_status

Name:

smart-selftest-status

Type:

str

Default Value:

None

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartSelftestStatus”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_supported

Name:

smart-supported

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartSupported”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_temperature

Name:

smart-temperature

Type:

float

Default Value:

0.0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartTemperature”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.smart_updated

Name:

smart-updated

Type:

int

Default Value:

0

Flags:

READABLE, WRITABLE

Represents the D-Bus property “SmartUpdated”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.write_cache_enabled

Name:

write-cache-enabled

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “WriteCacheEnabled”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

UDisks.DriveAta.props.write_cache_supported

Name:

write-cache-supported

Type:

bool

Default Value:

False

Flags:

READABLE, WRITABLE

Represents the D-Bus property “WriteCacheSupported”.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.